[vc_row full_width=”stretch_row_content_no_spaces” content_placement=”top” css=”.vc_custom_1481317372265{margin-top: -145px !important;}”][vc_column][vc_single_image image=”10443″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column width=”5/12″][vc_single_image image=”11406″ img_size=”full”][vc_column_text]

Stain Varnish

[/vc_column_text][vc_column_text][dt_sc_fancy_ul style=”rounded-tick”]

• Special grade varnish constituting a plasticizing synthetic alkyd components
• Forms a homogeneous mix of a fast setting product with good flow and drying
• It is clear in nature and gives good coverage, plasticity & softness

[/dt_sc_fancy_ul][/vc_column_text][/vc_column][vc_column width=”7/12″][vc_tta_tabs][vc_tta_section title=”Designed use” tab_id=”1484255111977-4851f5a8-7a63″][vc_column_text]Designed Use:

1. It is strongly recommended as a colored top coat finish on any type of wood
2. The original grains are preserved by the application

• It is more used in interiors but in milder conditions it can be used for the external systems too

Availability:

1. Available as per requirement

Coverage:

1. The theoretical coverage of ROBBIALAC STAIN VARNISH would be approximately 10 – 12 M²/liter at a Dry film thickness of 25 to 30 µ.

*Due consideration must be given to the evenness of the surface and the nature of the substrate.[/vc_column_text][/vc_tta_section][vc_tta_section title=”Surface preparation” tab_id=”1484255111978-586b842c-78b1″][vc_column_text]Recommendations for application:

1. Avoid humid conditions >95% and also dew point of <3% for application
2. The expected life span is directly related to the surface cleanliness and proper application.
3. Ensure that the surface to be painted is free from dust, and other loose flakes that would be detrimental in the proper application
4. It is strongly recommended that the wood surface is treated with ROBBIALAC WOOD PRESERVATIVE before the application of the ROBBIALAC STAIN VARNISH
5. Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components.

*Not suitable for immersed conditions & cannot be coated with 2K, Vinyl & aromatic thinned alkyd systems[/vc_column_text][/vc_tta_section][vc_tta_section title=”Method of application” tab_id=”1484255161116-585bad0a-a7fd”][vc_column_text]Method of application:

1. By a soft cloth/brush. One or two coats as required.
2. To keep the brush in good condition for use, clean the same in ROBBIALAC G.P THINNER and dry them immediately after application

Thinning recommendation:

1. ROBBIALAC G.P THINNER and to the extent of maximum of 10-15% of the varnish by volume.
2. Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components.   

Pack Sizes:

1. Available in metal tins in ½, 1 and 4 liter packs

[/vc_column_text][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row]