[vc_row full_width=”stretch_row_content_no_spaces” content_placement=”top” css=”.vc_custom_1481317372265{margin-top: -145px !important;}”][vc_column][vc_single_image image=”10629″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column width=”5/12″][vc_single_image image=”9846″ img_size=”full”][vc_column_text]

Pavement Blocks Paints (Water Base)

[/vc_column_text][vc_column_text][dt_sc_fancy_ul style=”rounded-tick”]

• Highly durable water based premium quality acrylic paint for application on floor surfaces on pavement blocks
• Gives a smooth matt finish on various substrates and increases the life and attraction of pavement blocks. It shields the pavement blocks from wear and tear to great extent.
• Designed with inert pigments (for superior lightfast characteristics)
• Strong anti mould and antifungal properties

[/dt_sc_fancy_ul][/vc_column_text][/vc_column][vc_column width=”7/12″][vc_tta_tabs][vc_tta_section title=”Designed use” tab_id=”1484252657624-b11fe466-096e”][vc_column_text]Designed Use:

1. Recommended for exterior usage
2. Robust system that can combat extreme weather conditions to a larger extent

Availability:

1. Standard shades are available Red, Green and as per customer requirement.

Coverage:

1. The theoretical coverage of ROBBIALAC PAVEMENT BLOCKS PAINT is approximately 7-9 M² liters at a Dry film thickness of 30 µ

*Due consideration must be given to the evenness of the surface and the nature of the substrate.[/vc_column_text][/vc_tta_section][vc_tta_section title=”Surface preparation” tab_id=”1484252657624-0a7ad797-b289″][vc_column_text]Surface preparations:

1. The surface to be painted needs to be clear of all grease, laitance and fungal growth
2. For best results spray the blocks with fresh water by force to ensure the surface cleanliness
3. Two to three coats of ROBBIALAC PAVEMENT BLOCKS PAINT can be applied as required, giving three to four hours gap between coats
4. Painted surfaces that require refurbishing can be prepared by removing the flakey old paint, sand gravel mud and other undesirable substances and proceeding with the procedure described above

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Method of application” tab_id=”1484252725707-38a1ad46-9456″][vc_column_text]Thinning recommendation:

1. Soft water and to the extent of maximum of 10% of the paint by volume.

Method of application:

1. By roller/brush and if large areas are to be painted one can use suitable spray application
2. To keep the brush/roller and spray equipment in good condition for use, clean the same in Luke warm water and dry them immediately after application

Pack Sizes:

1. Available in plastic pails of 4/20 liter packs

[/vc_column_text][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row]