[vc_row full_width=”stretch_row_content_no_spaces” content_placement=”top” css=”.vc_custom_1481317372265{margin-top: -145px !important;}”][vc_column][vc_single_image image=”10394″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column width=”5/12″][vc_single_image image=”11406″ img_size=”full”][vc_column_text]

Fine Texture

[/vc_column_text][vc_column_text][dt_sc_fancy_ul style=”rounded-tick”]

• Copolymer based compound designed to give a tough textured coating that has long life and can withstand a wide range of climatic conditions
• Composition ensures good breathing properties
• The product is designed with inert pigments and special grade of mineral quartz aggregates
• Fungicides and algaecides to ensure the required protection

[/dt_sc_fancy_ul][/vc_column_text][/vc_column][vc_column width=”7/12″][vc_tta_tabs][vc_tta_section title=”Designed use” tab_id=”1484253759673-82a892eb-c116″][vc_column_text]Designed Use:

1. Suitable for exterior finishes where long lasting finish is required and also decorative interior needs

Availability:

1. As per BERGER shade card

Coverage:

1.  The theoretical coverage of ROBBIALAC FINE TEXTURE is approximately 2-2.5 M² /kg at a Dry film thickness of 80 / 100 µ

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Surface preparation” tab_id=”1484253805455-1dc48ed8-3f17″][vc_column_text]

1. The surface to be painted needs to be clear of all grease, laitance and fungal growth
2. For best results use ROBBIALAC ANTIFUNGAL WASH for effective preparation on fungus affected areas
3. STUCCO PUTTY-EXTERIOR can be applied to fill all cracks and surface undulation for smooth surface
4. We recommend applying one coat of ROBBIALAC ACRYLIC PRIMER UNDERCOAT WHITE to provide thorough binding of ROBBIALAC FINE TEXTURE top coat
5. Two to three coats of ROBBIALAC FINE TEXTURE can be applied as required, giving three to four hours gap between coats
6. Painted surfaces that require refurbishing can be prepared by removing the flakey old paint and proceeding with the procedure described above

*Do not apply directly on surfaces containing previous coats of enamel paint or the same system.

 [/vc_column_text][/vc_tta_section][vc_tta_section title=”Method of application” tab_id=”1484253759674-967a03af-2fc0″][vc_column_text]Method of application:

1. By texture roller, spreading evenly with a uniform pressure so as to spread the texture evenly
2. To keep the roller and spray equipment in good condition for use, clean the same in Luke warm water and dry them immediately after application

Pack Sizes:

1. Available in plastic pails of 4/20 KG packs

[/vc_column_text][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row]