[vc_row full_width=”stretch_row_content_no_spaces” content_placement=”top” css=”.vc_custom_1481317372265{margin-top: -145px !important;}”][vc_column][vc_single_image image=”10182″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column width=”5/12″][vc_single_image image=”9846″ img_size=”full”][vc_column_text]

Epilac Zinc Chromate Primer (Base & Hardener)

[/vc_column_text][vc_column_text][dt_sc_fancy_ul style=”rounded-tick”]

• Epoxy based primer with high molecular Epoxy Resin and a suitable Catalyst and rust inhibitive pigments
• By virtue of its Epoxy constituent it gives very good adhesion and good resistance to Mild Acids, Bases and other Chemicals
• Good build up and has outstanding Anticorrosive Properties
• It is practically the most popular product for many coatings on Steel and other Metals with suitable surface preparation for short and medium term protection

[/dt_sc_fancy_ul][/vc_column_text][/vc_column][vc_column width=”7/12″][vc_tta_tabs][vc_tta_section title=”Designed use” tab_id=”1484266434224-aedbe8ad-4813″][vc_column_text]Designed Use:

1. It is recommended as a Blast Primer for Tanks exteriors, structural Steelwork, Chemical plant Pipelines, over head Cranes, various steels structures and other metals
2. It is recommended for both external as well as internal Designed Use

Availability:

1. As per customer requirement.

Coverage:

1. The theoretical coverage of ROBBIALAC EPILAC ZINC CHROMATE PRIMER 2K would be approximately 6 – 8 M² /liter per coat at a Dry film thickness of 40 – 60 µ per coat

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Surface preparation” tab_id=”1484266477604-0c7af6fc-a0ac”][vc_column_text]Surface preparation:

1. Avoid Humid Condition > 95 %. Not suitable for perpetual wet conditions
2. The product will not cure below 10°c, dry heat resistance is 120°c.
3. Remove the grease, oil, and wax by solvent cleaning
4. Apply one to two coats of EPILAC ZINC CHROMATE PRIMER 2K as required, followed by ROBBIALAC EPILAC ENAMEL topcoat

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Method of application” tab_id=”1484266434225-8b150912-88e0″][vc_column_text]Method of application:

1. By roller/brush and if large areas are to be painted one can use suitable spray application
2. To keep the brush/roller and spray equipment in good condition for use, clean the same in ROBBIALAC EPILAC THINNER and dry them immediately after application

Thinning recommendation:

1. ROBBIALAC EPILAC THINNER and to the extent of maximum of 10-15% of the paint by volume.
2. Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components

Pack Sizes:

1. Available in 3L, in 4L metal tins.

[/vc_column_text][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row]