Berger

Menu
[vc_row full_width=”stretch_row_content_no_spaces” content_placement=”top” css=”.vc_custom_1481317372265{margin-top: -145px !important;}”][vc_column][vc_single_image image=”10411″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column width=”5/12″][vc_single_image image=”9846″ img_size=”full”][vc_column_text]

Shield Gloss Enamel

[/vc_column_text][vc_column_text][dt_sc_fancy_ul style=”rounded-tick”]
  • Popular grade synthetic enamel
  • Durable and hardwearing
  • High gloss finish
  • Constituted by modified Synthetic Alkyd with Titanium Dioxide and other light fast Pigments
[/dt_sc_fancy_ul][/vc_column_text][/vc_column][vc_column width=”7/12″][vc_tta_tabs][vc_tta_section title=”Designed use” tab_id=”1484250207783-b91618e2-4013″][vc_column_text]Designed Use:

  1. It is strongly recommended as Enamel for interiors and mild exterior conditions as a top coat
    1. Wooden surfaces : Doors, Windows, Furniture and Cabinets
    2. Metal surface : Grills and Masonry Walls 

Availability:

  1. As per BERGER shade card

Coverage:

  1. Theoretical coverage of ROBBIALAC SHIELD GLOSS ENAMEL would be approximately 6-8 M² liter at a Dry film thickness of 30 µ.

*Due consideration must be given to the evenness of the surface and the nature of the substrate.[/vc_column_text][/vc_tta_section][vc_tta_section title=”Surface preparation” tab_id=”1484250207784-7744a338-b00f”][vc_column_text]Surface preparation:

  1. Avoid humid conditions >95% and also dew point of <3% for application
  2. The expected life span is directly related to the surface cleanliness
  3. The surface to be painted needs to be clear of all grease, laitance and fungal growth.
  4. Wooden surfaces:
    1. It is strongly recommended that the wood surface be treated with ROBBIALAC WOOD PRESERVATIVE
    2. ROBBIALAC WOOD PRIMER should be used to provide through binding of Shield Gloss Enamel top coat
  5. Steel and other metals:
    1. ROBBIALAC SHIELD RED OXIDE PRIMER is used as initial surface preparation to provide anti-rust properties
    2. ROBBIALAC ENAMEL UNDERCOAT WHITE should be used to provide through binding properties for Shield Gloss top coat
  6. Painted surfaces that require refurbishing can be prepared by removing the flakey old paint and proceeding with the procedure described above.

*Not suitable for immersed conditions & cannot be coated with 2K, Vinyl & aromatic thinned alkyd systems.

 [/vc_column_text][/vc_tta_section][vc_tta_section title=”Method of application” tab_id=”1484250264713-cf3f7c90-d385″][vc_column_text]Method of application:

  1. By roller/brush and if large areas are to be painted one can use suitable spray application.
  2. To keep the brush/roller and spray equipment in good condition for use, clean the same in ROBBIALAC G.P thinner and dry them immediately after application.

Thinning recommendation:

  1. ROBBIALAC G.P thinner solvent and to the extent of maximum of 10% of the paint by volume.
  2. Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components.

Pack Sizes:

  1. Available in metal tins of ½, 1 and 4 liter tins
[/vc_column_text][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row]
× Lets Chat