[vc_row full_width=”stretch_row_content_no_spaces” content_placement=”top” css=”.vc_custom_1481317372265{margin-top: -145px !important;}”][vc_column][vc_single_image image=”10488″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column width=”5/12″][vc_single_image image=”11406″ img_size=”full”][vc_column_text]

Rapid Dry Enamel

[/vc_column_text][vc_column_text][dt_sc_fancy_ul style=”rounded-tick”]

• Based on a modified alkyd system
• Excellent build up, quick drying and good flow properties
• Extremely rich in pigmentation like Titanium Dioxide and other light fast pigments, which gives a rich finish
• The product gives a tough, highly durable and hardwearing finish

[/dt_sc_fancy_ul][/vc_column_text][/vc_column][vc_column width=”7/12″][vc_tta_tabs][vc_tta_section title=”Designed use” tab_id=”1484264231178-44c38498-5ffc”][vc_column_text]Designed Use:

1. It is strongly recommended as Enamel for interiors and mild exterior conditions as a top coat
   1. Metals and steel structures: grills and masonry walls
   2. Can also be used on wooden surfaces: doors, windows, furniture and cabinets

Availability:

1. As per customer requirement.

Coverage:

1. The theoretical coverage of ROBBIALAC RAPID DRY ENAMEL would be approximately 7 – 8 M² /liter at a Dry film thickness of 30 µ

*Due consideration must be given to the evenness of the surface and the nature of the substrate.[/vc_column_text][/vc_tta_section][vc_tta_section title=”Surface preparation” tab_id=”1484264231179-51cbde1e-96ec”][vc_column_text]Surface preparation:

1. Avoid humid conditions >95% and also dew point of <3% for application
2. The expected life span is directly related to the surface cleanliness and proper application.
3. The surface to be painted needs to be clear of all grease, laitance and fungal growth.
4. Steel and other metals:
   1. ROBBIALAC ETCH/EPILAC ZINC CHROMATE PRIMER is used as initial surface preparation to provide anti-rust properties
5. Wooden surfaces
   1. NC sanding Sealer should be used as a preparatory first coat for the final top coat
6. Painted surfaces that require refurbishing can be prepared by removing the flakey old paint and proceeding with the procedure described above.

*Not suitable for immersed conditions & cannot be coated with 2K, Vinyl & aromatic thinned alkyd systems.[/vc_column_text][/vc_tta_section][vc_tta_section title=”Method of application” tab_id=”1484264285516-302f5b9f-f880″][vc_column_text]Method of application:

1. By roller/brush and if large areas are to be painted one can use suitable spray application.
2. To keep the brush/roller and spray equipment in good condition for use, clean the same in ROBBIALAC G.P THINNER and dry them immediately after application.

Thinning recommendation:

1. ROBBIALAC INDUSTRIAL THINNER and to the extent of maximum of 10% of the paint by volume.
2. Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components. 

Pack Sizes:

1. Available in metal tins of 4L packs

[/vc_column_text][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row]