[vc_row full_width=”stretch_row_content_no_spaces” content_placement=”top” css=”.vc_custom_1481317372265{margin-top: -145px !important;}”][vc_column][vc_single_image image=”10207″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column width=”5/12″][vc_single_image image=”11406″ img_size=”full”][vc_column_text][dt_sc_fancy_ul style=”rounded-tick”]

• Required for removing previously painted surfaces or for corrective purposes
• Solvent based
• Penetrates into the dry film and lifts the coating by a stripping action
• The thixotropic nature of the product does not allow it to flow away from the target area and therefore allows maximum penetration

[/dt_sc_fancy_ul][/vc_column_text][/vc_column][vc_column width=”7/12″][vc_tta_tabs][vc_tta_section title=”Designed use ” tab_id=”1484297452599-3017cf94-a055″][vc_column_text]Designed Use:

1. Can be used on previously painted enamel and water based substrates

Availability:

1. As per customer requirement.

Coverage:

1. The spreading of ROBBIALAC PAINT REMOVER would be approximately 5-10 M² /liter.

*Due consideration must be given to the extent of previously painted surfaces and the nature of the substrate.[/vc_column_text][/vc_tta_section][vc_tta_section title=”Surface preparation” tab_id=”1484297452600-dc9f9e74-5e64″][vc_column_text]

1. Remove all dust and moieties and apply one coat of ROBBIALAC PAINT REMOVER
2. Allow for 10-15 minutes for penetration time
3. Accordingly scrape off the old paint film
4. For stubborn areas repeat the same process mentioned above and scrape the loose matter

[/vc_column_text][/vc_tta_section][vc_tta_section title=”Method of application” tab_id=”1484297537877-7fdac8ed-4ec3″][vc_column_text]Method of application:

1. By roller/brush and ensuring rubber gloves and protective goggles are worn at all times

Thinning recommendation:

1. No thinning required.

Pack Sizes:

1. Available in plastic pails of 1 and 4L packs

[/vc_column_text][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row]