[vc_row full_width=”stretch_row_content_no_spaces” content_placement=”top” css=”.vc_custom_1481317372265{margin-top: -145px !important;}”][vc_column][vc_single_image image=”10192″ img_size=”full”][/vc_column][/vc_row][vc_row][vc_column width=”5/12″][vc_single_image image=”11406″ img_size=”full”][vc_column_text]

Robbialac Speedkote Road Marking Paint Chlorinated Rubber Based

[/vc_column_text][vc_column_text][dt_sc_fancy_ul style=”rounded-tick”]

• Based on a synthetic alkyd system modified with Chlorinated based Resin with Titanium Dioxide and other light fast pigments with tough extenders
• Quick drying and good build up
• Resists gasoline, oil, water and does not bleed on asphalt
• Good weathering properties
• long lasting coating with good toughness

[/dt_sc_fancy_ul][/vc_column_text][/vc_column][vc_column width=”7/12″][vc_tta_tabs][vc_tta_section title=”Designed use” tab_id=”1484266810756-b3df32bd-ed1d”][vc_column_text]Designed Use:

1. It is recommended for exterior coatings on asphalt roads, krebstone pavements, and runways

Availability:

1. As per customer requirement.

Coverage:

1. The practical coverage of ROBBIALAC SPEEDKOTE ROAD MARKING PAINT would be approximately 6- 8 M² /liter at a Dry film thickness of 75 µ.

*Due consideration must be given to the evenness of the surface and the nature of the substrate.[/vc_column_text][/vc_tta_section][vc_tta_section title=”Surface preparation” tab_id=”1484266810756-9eaa7fb5-7d22″][vc_column_text]Surface Preparation:                                                                                                                             

1. Avoid humid conditions >95% and also dew point of <3% for application
2. The expected life span is directly related to the surface cleanliness and proper application.
3. Ensure that the surface to be painted is free from dust, and other loose flakes that would be detrimental in the proper application
4. Apply a dilute first coat of the ROBBIALAC SPEEDKOTE ROAD MARKING PAINT evenly on the surface for giving a good penetration to the porous surface and finishing with a heavier coat as required

*Not suitable for immersed conditions & cannot be coated with 2K, Vinyl & aromatic thinned alkyd systems.[/vc_column_text][/vc_tta_section][vc_tta_section title=”Method of application” tab_id=”1484266860422-5cd9e55d-0279″][vc_column_text]Method of application:

1. By roller/brush and if large areas are to be painted one can use suitable spray application.
2. To keep the brush/roller and spray equipment in good condition for use, clean the same in ROBBIALAC G.P THINNER and dry them immediately after application.

Thinning recommendation:

1. ROBBIALAC INDUSTRIAL THINNER and to the extent of maximum of 5-10% of the paint by volume.
2. Stir well with a convenient mixing equipment for uniformity to ensure good mixing of all the components.

Pack Sizes:

1. Available in metal tins of 4L

 [/vc_column_text][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row]